Pleated Air Filters

QualityACFilters.com
"Custom Made Air Conditioning Filters"
State of Florida Lic & Ins. # CAC042713

"Quality Filters Built To fit Your AC"

Pleated Air Filters

Unlike many competitive brands that use a less efficient, outdated cotton/poly media, "pleated" filters utilize a 100% synthetic, gradient density non-woven filter media, which represents the latest in pleated ac filter media technology. It is totally hydrophobic so it will not absorb moisture. Pleated Filters are made of durable heavy-duty construction. An expanded metal retainer is bonded to the air-leaving side of the media to maintain uniform pleat spacing and to eliminate vibration of the pleat pack. The pleat pack is enclosed in a strong, double-wall beverage board frame, which resists moisture from humidity or intermittent rain. For additional frame rigidity all diagonal supports of the beverage board frame are securely bonded to the pleat at all contact points.

We use " Quality Pleats "

SAME PRODUCT USED BY 3M

HEAVY DUTY BEVERAGE BOARD FRAME

SYNTHETIC MEDIA

30 GAUGE MEDIA SUPPORT METAL GRID

ELECTRO STATICALLY CHARGED

STABILIZER FACE GRIDS BONDED TO PLEATS

PRINCIPLES:

Quality Pleats" filters operate on a principle of filtration which utilizes controlled pleat spacing and alignment. Air pressure is diffused over the entire pleated filter surface. Heavier dirt particles, carried by their own inertia, are lodged in the back of the pleats. Finer and microscopic particles are able to change direction and are deposited on the sides of the pleats. The accumulating particulate matter functions as an additional filtration medium. Controlled pleat spacing and alignment allows for uniform dust lodging and full media utilization as well as uniform air flow both upstream and downstream.

APPLICATIONS:

"Quality Pleats" extended surface filters are designed for long service life and reduced HVAC air handling equipment maintenance costs through higher filter efficiencies.

SPECIFICATIONS:

Air Condition filters shall be pleated media type. The filter media shall consist of 100% synthetic electro statically charged thermally bonded fibers with no chemical binders. The media shall be continuously bonded to a 30 gauge galvanized, corrosion resistant, expanded metal support grid with an effective open area of 96%. The media shall be pleated to maximize surface area and dust holding and minimize airflow resistance. The enclosure frames shall be constructed of high wet strength moisture resistant beverage board. Diagonal support members of the frame are to be bonded to the air entering and exit apexes of each pleat to prevent pleat collapse
and filter bowing. The inside periphery of the enclosing frame shall be completely bonded to the outer edges of the filter media to prevent dust bypass. The air filters shall be listed and rated by Underwriters "Laboratory as UL Class 2 and shall have a maximum temperature rating of 180 degrees Fahrenheit. Filters shall be tested according to ASHRAE test method 52.1-92 at 300 FPM for
24x24x1 filters and 500 FPM for 24x24x2 and 24x24x4 filters at a final pressure drop of 1" water gauge. Optionally, filters shall be
tested in accordance with ASHRAE 52.2 test method for a MERV rating at the mandated airflow and final pressure drop.